Simple system-grid 

• widths from 30 cm to 90 cm in 15-cm increment grids for best-possible adaptation to the structure
• practical heights of 1.20 and 3.00 m
• 75 cm wide universal panel for outside corners, columns and end-shuttering
• larger gang-forms for fast repositioning with crane possible
  

Frami clamp 

• one blow of the hammer on the Frami clamp is all it takes to pull the panels together and achieve a flush, correctly aligned panel joint that is resistant to tensile forces
• no need for extra stiffening reinforcements

Conteinuous height mismatch 

• continuous hardware slot in the frame for fixing the Frami clamp anywhere on the frame
• continuous height mismatch without pre-defined increment-grid
• easy accommodation to steps, slopes and uneven ground, without extra work

Utilisation

In use across the entire room height

• only three form ties per 300 cm panel height
• permitted fresh-concrete pressure: 60 kN/m²
• cost-effective forming of stop-ends, outer corners and columns through special hole pattern in the 75 cm wide Frami eco universal panel
• an extensive range of accessories ensures safety when pouring

Used for foundations

• the Frami tie-holder bracket relocates the form tie above the panel (form tie not in concrete) for flexible positioning
• foundation anchoring system consisting of flat tie rods and Frami clips
• for walls between 10 cm and 80 cm thick in a 5-cm increment-grid
• no anchoring through concrete
• no supporting timbers required
• the bottom of the panel is fixed with foundation clamps and perforated tape